Skip to main content

Softbank C01HW (E5832) Unlock download!

Softbank C01HW (E5832) UNLOCK added.
A new unlocker has born.


This one allows you to unlock *ANY* Huawei "E5" model.
Set your device FREE from it's chains!
All download links in previous posts now point to this version.
Instructions are included in the zip file.

Comments

  1. Thank you Zibri for everything!
    I have used your activator to successfully unlock Softbank's C01HW.
    All I needed to do after unlocking was to go into the management console on 192.168.1.1 (user: admin, password: device's WEP key), go into 3G settings/Profile Settings, rename the profile and edit the settings according to my provider, save and then in Connection Settings choose the profile I have just created. Restarted the device and it worked!
    Keep up the good work

    ReplyDelete
  2. I couldn't change dial up number of C01HW'profile.
    How to change?

    ReplyDelete
  3. You must go to http://192.168.1.1

    Login with usertname/password Admin (with a capital A)

    Create a new profile for your carrier then set it as the default.

    ReplyDelete
  4. I am getting the message "connect card" what does it means? what am I am doing wrong?

    ReplyDelete
  5. It means you didn't read the instructions inside the zip file :)

    You must first install the serial drivers from the card's "cd"

    ReplyDelete
  6. just purchased one. when I try to unlock the device e5832s (megafon russia) it says "network error". and the code doesnt work for the second time when i try to use it to unlock the same device

    ReplyDelete
  7. @avee: please read the instructions inside the zip file.

    ReplyDelete
  8. well - had some problems, but did just as you said in your e-mail and 2 minutes later IT WORKS!!! Thanks a lot, Zibri!!!

    ReplyDelete
  9. I had same troubles with "Connect card" message - Instructions doesn't tell me anything about "You must first install the serial drivers from the card's "cd"" and no CD provided with my card. After installing "WEB partner" from device it start to work - maybe it can help somebody.

    ReplyDelete
  10. Hey Zibri, am trying to unlock my E585 from 3 UK. I have followed your instructions perfectly, installed the 3Mobile drivers first, Windows 7 says the drivers are installed, etc... I do have the latest .Net Framework version 4. so in short, I remove the battery ad SIM, turn it back on without SIM, connect the MiFi to the Windows7 PC, run your latest program, it may times says "connect card" even though it is already connected. Then eventually after I unplug it and plug it back in it will say "Connected", then it says initializing, then..... booom. I get this error (next comment)

    ReplyDelete
  11. You must install the serial drivers from the "fake cdrom" that appears in My Computer when you connect the device.

    ReplyDelete
  12. Hi, is there any chance to put E586 into the list.

    Thanks a lot

    ReplyDelete
  13. I'm working on it, but I don't have enough spare time at the moment :(

    ReplyDelete
  14. How to enable telnet on E5832S? The utility for E5830 stays on "Connect Card". Thanks!

    ReplyDelete
  15. That's because the utility is for E5830 and not for e5832s! (Did I need to say that???)

    ReplyDelete
  16. Yes I think you need to say that Zibri because on your page it says with your own words: "This one allows you to unlock *ANY* Huawei "E5" model"

    You should correct it so that people understand that it's not *ANY* E5 model...

    ReplyDelete
  17. Excuse me, this is the telnet post: http://www.zibri.org/2010/04/e5830-telnet-server-enabler.html

    It clearly states that's for E5830.

    ReplyDelete
  18. About the unlocker, it can handle all e585 models. Unlocking has nothing to do with telnet.

    ReplyDelete
  19. Okay, so, there is no way to enable telnet on E5832S?

    ReplyDelete
  20. There's always a way around things.. I just don't had the time to inspect that.

    ReplyDelete
  21. HI, Zibri

    Does your program support Softbank C01HW?
    I use your program, but how can I get the unlock key? I tried to connect to the driver, but nothing reply

    ReplyDelete
  22. Yes! It works. Please read the instructions inside the zip file.
    First thing you need to uinstall the driver.

    ReplyDelete
  23. Hi Zibri got the card unlocked ok but cant connect to the internet displaying "no service" with docomo usim in japan have I done something wrong?

    ReplyDelete
  24. I don't know.. you must configure the card for the new provider. But "no service" seems to mean the card can't lock to the provider's frequency.

    ReplyDelete
  25. I use C01HW.
    SoftBank sells C01HW as "overseas SIM unlocked" in Japan.
    Bat C01HW is "SIM locked" in Japan.
    Called "network lock", maybe C01HW dont display NTT docomo network(MCC=440,MNC=10,UMTS 2100).
    I use docomo network with same usim, same place and another SIM unlocked modem.
    Perhaps similar to "Huawei E585 Vodafone australia lock" case.
    Please unlock C01HW in Japan.

    ReplyDelete
  26. My program can unlock C01HW!
    When it's locked it shows "wrong sim".
    "no service" has nothing to do with the unlock.

    ReplyDelete
  27. hello Zibri,
    please help me, i want to unlocked my huwei C01HW
    please teach how?

    ReplyDelete
  28. Download my program and read the instructions.

    ReplyDelete
  29. I couldn't run the program on windows 8.
    Did I do something wrong?

    ReplyDelete
  30. I don't know. I don't have windows 8. The program is fully tested under windows 7 32 and 64 bit.

    ReplyDelete
  31. hi.
    thanks for the E5_Unlocker.

    softbank's c01hw is supported by the program?docomo's sim card can be used on it?
    if can't ,refund is ok?

    ReplyDelete
  32. Yes, and no.

    Yes: it's supported and proved to work.
    No: no refunds because it just works if you follow the included instructions.

    ReplyDelete
  33. HI Zibri,

    The link is not working!

    Thanks!

    ReplyDelete

Post a Comment

Popular posts from this blog

Powerline Ethernet fun and secrets.

Many 200 Mb/s powerline adapters nowadays are based on the INTELLON 6300 chipset. Despite what can be thought looking at them, they are all using the same hardware and firmwares. I heard many people with Netgear XAV101 or Linksys PLK 200 or PLE 200 having problems after firmware updates and many other people with other brands having much more problems because of lack of support or configuration/upgrade utilities. So let me explain a few things I learnt studying them. Many of 200 Mb/s powerline ethernet adapters follow the "HomePlug AV" standard. (85 Mb adapters use HomePlug 1.0 standard which is completely different). This standard uses ethernet broadcast packets using the HomePlug AV protocol. The interesting thing is that their firmware is made of two different parts: a .PIB file (Parameter Information Block) and a .NVM file (the code itself). In the P.I.B. there are many interesting things: The branding (mac address, device name, etc) and the tone map. I test

TP-LINK Configuration file encrypt and decrypt.

Here we go! TP-Link is another company that thinks that security by obscurity could ever work. If you "backup" the configuration from most TP-Link routers, you will get a .BIN file which is "encrypted". Use this utility below, to decrypt it (so you can edit it) and encrypt it again. Have fun. Drop files here or

Obfuscation will never work.

ml> Hello again, sweet readers ! OpenRG is an embedded OS for routers. It's based on Linux and it's inside many ISP routers out there. Inside OpenRG configuration file, passwords appear in a way that can seem to be crypted, but it's just obfuscated. For example: (username(admin)) (password(&b7;X&5c;&b9;&a2;)) Above you can see a simple deobfuscator. Enjoy! You can try it with: &ad;Y&5b;&b3;&a3;&17;T&8b;&c4;&b9;#&96;&04;c&ea;&1d;$%&5d;&16;&08;B3&c0; :) Zibri.