Donate via paypal and PASTE the confirmation number of your donation.
The transaction id should work after a minute from your donation.
Donate using the window opened by the program.
The code will work only on the PC you run the program.
This program works only with Huawei E583C.
Send me an email if you need an unlimited version.
(Unlimited number of unlocks)
If the program says "Connect card." that means that E583C drivers
are not installed correctly.
Remove any "wifi manager" and old drivers,
then reinstall E583C drivers from it's virtual cdrom.
Please be sure that you have run "autorun.exe" which should have
appeared in a pop-up window when you first inserted the Mifi. This is
required to install all the drivers that are needed for the
modification. If you have not done this
Here we go! TP-Link is another company that thinks that security by obscurity could ever work. If you "backup" the configuration from most TP-Link routers, you will get a .BIN file which is "encrypted". Use this utility below, to decrypt it (so you can edit it) and encrypt it again. Have fun. Drop files here or
ml> Hello again, sweet readers ! OpenRG is an embedded OS for routers. It's based on Linux and it's inside many ISP routers out there. Inside OpenRG configuration file, passwords appear in a way that can seem to be crypted, but it's just obfuscated. For example: (username(admin)) (password(&b7;X&5c;&b9;&a2;)) Above you can see a simple deobfuscator. Enjoy! You can try it with: &ad;Y&5b;&b3;&a3;&17;T&8b;&c4;&b9;#&96;&04;c&ea;&1d;$%&5d;&16;&08;B3&c0; :) Zibri.
Many 200 Mb/s powerline adapters nowadays are based on the INTELLON 6300 chipset. Despite what can be thought looking at them, they are all using the same hardware and firmwares. I heard many people with Netgear XAV101 or Linksys PLK 200 or PLE 200 having problems after firmware updates and many other people with other brands having much more problems because of lack of support or configuration/upgrade utilities. So let me explain a few things I learnt studying them. Many of 200 Mb/s powerline ethernet adapters follow the "HomePlug AV" standard. (85 Mb adapters use HomePlug 1.0 standard which is completely different). This standard uses ethernet broadcast packets using the HomePlug AV protocol. The interesting thing is that their firmware is made of two different parts: a .PIB file (Parameter Information Block) and a .NVM file (the code itself). In the P.I.B. there are many interesting things: The branding (mac address, device name, etc) and the tone map. I test