Skip to main content

Australian E585 (pocket wifi) UNLOCKED!


Here is the unlocker for you to download!

Highlights:
1) very fast (2-3 seconds)
2) Compatible with Xp, Vista and Win7
3) easy to use.

Instructions:

Download the program.
Run the program.

Donate via paypal and PASTE the confirmation number of your donation.
The transaction id should work after a minute from your donation.
Donate using the window opened by the program.

The code will work only on the PC you run the program.
This program works only with Huawei E585.

Send me an email if you need an unlimited version.
(Unlimited number of unlocks)

Note:
If the program says "Connect card." that means that E585 drivers
are not installed correctly.
Remove any "wifi manager" and old drivers,
then reinstall E585 drivers from it's virtual cdrom.

Please be sure that you have run "autorun.exe" which should have
appeared in a pop-up window when you first inserted the Mifi.  This is
required to install all the drivers that are needed for the
modification.  If you have not done this
you may see a message "Connect card."

You also have to switch it ON pressing
 the button on the right side of the E585.

For the best result:

1) turn ON the e585 (invalid sim on display)
2) install drivers and then disconnect the e585
3) run my program and enter the code.
4) connect the e585 when my program asks.
5) wait and be happy :)

Comments

  1. The program *SHOULD* work also with the newest batch of 3UK E585 (the ones with only one com port). This program is now in beta test, so contact me for any issues.

    ReplyDelete
  2. How much for...

    a) A single unlock
    b) Unlimited unlocks (we have a number of the e585's in our office).

    ReplyDelete
  3. @Gaelic write me an EMAIL. You've got the wrong program.

    The price will popup when the program starts.

    ReplyDelete
  4. It's confirmed. This version of the unlocker works also with the newest batch of 3UK e585 (the ones with only one com port)

    ReplyDelete
  5. Every time i try and enter my confirmation number i get an error "wininet error #18 : (Unknown WININET error # 18)

    ReplyDelete
  6. 1) turn ON the e585 (invalid sim on display)
    2) install drivers and then disconnect the e585
    3) run my program and enter the code.
    4) connect the e585 when my program asks.
    5) wait and be happy :)

    ReplyDelete
  7. Hi Zibri,

    When i enter the code (either manually or paste it in) i then press enter and get this error "wininet error #18 : (Unknown WININET error # 18)"

    I am using Win 7 64bit trying to unlock Australian E585.

    Thank you for your assistance

    ReplyDelete
  8. Follow this procedure to avoid that error:

    1) turn ON the e585 (invalid sim on display)
    2) install drivers and then disconnect the e585
    3) run my program and enter the code.
    4) connect the e585 when my program asks.
    5) wait and be happy :)

    ReplyDelete
  9. @Zibri I folled your instructions exactly. i even created a new user account on my PC. When i paste the paypal Unique Transaction ID into your program, once i press enter it gives me that error. if i press enter again it tells me "wrong code". What am i doing wrong??

    ReplyDelete
  10. That error means my program can't reach the authorization server. It usually happens because of the e585 connected. You must disconnect it FIRST then run my program and THEN reconnect it.
    It you still have that problem then you have to check your network connections and firewall.

    Note: email me (my email is on the purchase page on paypal) this is not the place for support.

    ReplyDelete
  11. where is the code? I cant find it ..

    ReplyDelete
  12. The confirmation code is the one without dashes.

    If you can't find it, since I'm a patient guy, I just sent it to you by email.

    ReplyDelete
  13. hi, i donated and ran the program according to the instructions, everything seemed to work, but now when i put my telstra sim card into it, it comes up with an "R" in a box in the bottom right of the display, and does not show the globe; it does not allow me to connect to the net.

    I need help.

    ReplyDelete
  14. I donated to unlock Huawei E585 of Vodafone Australia and try to unlock by UnlockE585_au.exe. However, I could not unlock it. the Unlocker window showed the error message "COM Port Error: Unknown Error #1167 on COM3." or showed no dialog after connect the modem to PC.
    I have tried to delete the drivers or change the port number on the Device Manager, re-install the driver software and reboot the PC several times. But the situation was not chaged.
    Can you please advise me?

    ReplyDelete
  15. That happened because another program is using your serial port. Check in the task bar and in task manager and kill any wifi manager or pocketwifi program running. Do that immediately after a reboot. Then my program can access the serial port and work correctly

    ReplyDelete
  16. Successfully unlocked my Australian prepaid Vodafone pocket wifi Huawei E585 using your unlocker, and now using it with my Malaysian Maxis sim!

    I'm using Windows 7 via VMWare Fusion 3.1.2 on Mac OS 10.6.5. No issues at all, just followed your steps exactly as you advised.

    Thank you Zibri, well worth the donation :)

    ReplyDelete
  17. It makes my day when someone posts a message like this. 2000 people used my unlocker(s) and only a bunch took the time to say something like this.

    Thanks, and spread the word!

    ReplyDelete
  18. It's workin dude! Nice work!!! Made a donation and no regrets at all. Thanks a million!!!

    ReplyDelete
  19. I have an E585 bought from Ausralia 3. After I got back in Hong Kong and insrted local SIM card, it does not show "inalid sim" on the display and looks fine with 3 and antenna mark shows on the display. However, when I try to connect any WiFi device to it, it will show connecting and disconnected alternatively on the display of E585 and I could never get any connection. Is this also a SIM lock problem? Can your program fix his probem?

    ReplyDelete
  20. That means 2 things:

    1) My unlocker worked and your card is unlocked.

    2) You didn't configure the APN for the new SIM!

    To do that, open it's web page, login with Admin as the password, setup a new PROFILE and set it as default.

    ReplyDelete
  21. Big thanks to Zibri,

    Midnight sydney time I found this this before im off OS the next day, downloaded it, few little hassles but simple stuff if you read the above comments (I was running wireless which was using my serial port) once those things were sorted ran the app again and it all worked, simple as.

    Well worth the $$ spent.

    unlocked a E585 Vodafone AU device, windows XP SP3.

    Thanks again!

    ReplyDelete
  22. Worked a bloody treat! Thanks heaps!

    To those that had "Unknown Error ??? on COM?" problems:

    Once it says "Connect Card," disconnect from the internet, exit any instances of your mobile broadband software (eg, Optus, Telstra, Dodo or whatever) - and make sure there are no instances running in your taskbar (click the little 'up arrow' near the clock if there is one).


    It failed for me the 1st time I tried (because of the Optus programme trying to use the E585), but I turned it all off for the 2nd attempt and it worked brilliantly.

    I'm now free of Vodafone - and much happier to pay Zibri than pay an extra cent to that horrible Vodafone monster.


    Thanks again Zibri!

    ReplyDelete
  23. Thanks to you for taking the time to post a success story (people post messages only if something goes wrong).

    And thanks for making my day ;)

    ReplyDelete
  24. Hi Zibri
    need some help i have purchased the code via paypal on two computers running windows 7 one 32bit and the other 64bit and when i run your program i get "wininet error #18 : (Unknown WININET error # 18)" .I have followed your description to the T but will not work. So also tried in on my server 2003 o.s 64bit and just get wrong code. Can you please help
    Cheers Dino

    ReplyDelete
  25. That erro only means my program can't connect to the internet to check the code.

    Connect the card only when my program asks.. not before. But in that moment you need an internet connection present.

    ReplyDelete
  26. Hi Zibri,

    M a Mac user and using the Huawei E585. Could I still run the unlocking program? coz u mentioned it runs with XP, vista n win7. None mention of Mac. Pls lemme knw? Seems alot of ppl r happy with your unlocking prog. just wished it wld also work with Mac users!

    Cheers!

    ReplyDelete
  27. 1) Thank you for the unlock. The PayPal code worked instantly and no more "INVALID SIM" message.

    2) Slight issue that I hope you can help with. I can only access the settings page (http://192.168.1.1) when the original SIM is in. If I put in a different SIM, I cannot get that page to open.

    ReplyDelete
  28. Thanks.
    About point 2, I've never had that issue and nobody else reported it.

    I can access that page with my italian SIM in it.
    Try to change it's address to something different like 192.168.10.1 (and remember to change also DHCP server addresses accordingly).
    Maybe you have a collision with other appliances in your network (like your adsl router).

    ReplyDelete
  29. Hi Zibri,

    It appeared to worked as described - I put an Australian OPTUS sim into the Huawei E585 and although it recognizes the sim it doesn't connect properly.

    Are there any issues with Optus or is it my end - thanks

    ReplyDelete
  30. No issues. You must configure a new profile and save is as default.

    ReplyDelete
  31. Hi Zibri,
    I got this error :

    The given key was not present in the dictionary

    What should i do ?

    ReplyDelete
  32. @adrianus: you must BUY a code from the browser windows my application opens. You can't use a domantion code. You must use a purchased code.

    ReplyDelete
  33. Hi Zibri...

    I understand what I did wrong, as I didnt read thoroughly.

    What should I do now ? The program won't let me clear the number to re-input the the confirmation number.

    Should I use a new computer ? I'd rather not tho :D

    Thanks for your kind suppoer

    ReplyDelete
  34. Just enter CLEAR instead of your code and press enter. Then you can enter your code again.

    ReplyDelete
  35. Zibri, I've got it... Thanks...

    One more thing, if you would...

    Do you by any chance know the admin password for Australia Vodafone E585 ? Need to change the APN setting. I tried the default password "admin" but didn't work...

    Anyway, THANKS !

    ReplyDelete
  36. Eheheh yes. I do...

    It's IS Admin... but with the CAPITAL "A" ;)

    ReplyDelete
  37. YOU ARE MY SAVIOR !.....

    Thank you so much...

    ReplyDelete
  38. Hi My card with Australian vodafone. When I ran ur program, there is a window pop up and say connect card. Then I connect the card, it move to the Enter unlock window. I cant find where i can buy the code, please help me

    ReplyDelete
  39. You just need to enter "BUY" and press enter.

    ReplyDelete
  40. Hi From Australia with E585modem problem. Looks like the unlock worked as Modem was on Vodafone and I have a Telstra Sim. I logged in to configure a new profile and save is as default there is no change, I even used search network on manual and only finds Telstra 2G, I save that and then after 30 seconds it goes back to 3 with an R at the bottom right. What am I missing? Did i Download the correct Software for the Australian version or did I miss a step?
    Many Thanks for your help.
    Tony

    ReplyDelete
  41. Your card is unlocked (otherwise it would display "Wrong SIM").

    Everything else depends on settings and SIM <> Operator combination.

    Most likely your sim is not data-enabled.

    ReplyDelete
  42. Hi My unlocked device is not transferring data when I use with Optus data card. But it doesnt say invlaid card neither.

    ReplyDelete
  43. That's because after unlocking (which clearly was successful) you must configure it for the new SIM.

    ReplyDelete
  44. Configured Sim as you requested with new profile, sim is data enabled, When i choose Telstra it only locks in for around 10 seconds and then goes to 3 network.
    Funny thing is even though it shows 3 network and R -I am able to log into the internet and surf. The sim was taken out of a Telstra Touch tab I can't see how this would make a difference. As far as I can tell all is working well apart from this strange display info.

    Thanks for your help.

    ReplyDelete
  45. @tony: that happens because that sim is not accepted for data. Ask your provider or try a sim with a data plan.

    ReplyDelete
  46. The display "glitch" is a cosmetic bug in the firmware. And has nothing to do with unlock.

    ReplyDelete
  47. This is driving me nuts. I have read all the comments and I still get the PORT BUSY come up after I connect the E585. Help.

    I take the battery out, reinstall the software, disconnect all devices to free up com ports. I even went into Device manager and it only shows the E585 on Com Port 6.

    WIFI is turned off.

    ReplyDelete
  48. You get the PORT BUSY error because another program on your system is using the same serial port. Most probably it's the "pocket wifi" you see in the TRAY near the clock.

    Quit any program "wifi manager" / Powcket wifi and the run again the unlocker.

    Please carefully read the instructions inside the ZIP file.

    ReplyDelete
  49. Zibri. GOT IT.. I had already turned off the WIFI manager, but because I had the Pocket Wifi connected via USB, the Vodafone Program automatically started and sat in the background.

    As soon as I closed down the Vodafone PROGRAM, it worked immediately.

    ReplyDelete
  50. Finally! :)
    Yes. The serial port in itself is something that can'e be used by many programs at the same time.
    So, for my (or any other) program to work, the port must be free.

    ReplyDelete
  51. I saw that you need an internet connection for this. What if the only internet connection I can get is wifi?

    ReplyDelete
  52. Any connection is good the only problem arises if you use the mifi itself for connecting.. it seems an obvious thing but for many people it's not :)

    ReplyDelete
  53. Hi Zibri,

    I need an unlimited version of your software for Huawei E585.

    How much is the donation required?

    Thank you.

    Eric

    ReplyDelete
  54. Run the program then enter BUY UNLIMITED (instead of the code) and you will know.

    Please read the included instructions.

    ReplyDelete
  55. Gday mate, just a call to say it sounds like everyone is pretty happy with your software and id love to as well at this price to unlock.

    Problem is my device is showing the network that i am on óptus' and can send and receive txt but there is no 'world' symbol is the top right of the display confirming me that im actually connected to the net. 21 bucks is a reasonable price to see it unlocked, but at this time its only half there...

    Network Carrier - Optus
    Model- E585 unlocked from vodafone

    Any suggestions would be greatly appreciated. Cheers.

    ReplyDelete
  56. @dman: that's because I did my half of the job, you didn't do yours :)

    you must configure the card after unlock.
    set up a new profile and then set it as default.

    ReplyDelete
  57. Hi Zibri,

    sounds like for every sim card of different country i have, i need to unlock each of them.is there a way to unlock the pocketwii unit itself? that will help alot...

    ReplyDelete
  58. @Addixion: exactly what my program does.

    It unlocks the device. After that you can use any SIM you want, you will just need to configure it (new profile >> APN >> set as default)

    ReplyDelete
  59. Ok the situation is this. I've managed to unlock my e585 unit. It's showing connected but after awhile it gets disconnected. The globe icon is not showing though 3G and wifi is on full bar. I've input the APN as required. Puzzled.

    ReplyDelete
  60. After correctly configuring a new APN with user and pass, you must SET IT AS the DEFUALT!

    ReplyDelete
  61. I did just that. Still not working. I noticed the comnection settings shows DISCONNECT as the connection status. And no IP detected. Did something went wrong during the unlock? Can I unlock another time?

    ReplyDelete
  62. Everything went perfect during unlock (or you would read "invalid sim". It's a configuration problem (or the sim is not data enabled).
    If in doublt you can reset the card and start again (no need to unlock again)

    ReplyDelete
  63. Thanks Zibri... Working now ;-) thanks

    ReplyDelete
  64. hey

    where cann i find the drivers..?

    sorry for the stupid question...thank

    ReplyDelete
  65. When you connect the card you will see a new "cdrom" present in your computer.
    Open it and run AUTORUN.EXE

    ReplyDelete
  66. Will this work for the E585 v2 model from Vodafone Australia?

    ReplyDelete
  67. hi i already buy the unlimited code.but the program say"code had been used already".i want to ask what can i do for me?

    ReplyDelete
  68. Something went wrong. Read the included instructions. You can clear the code and use it again.

    ReplyDelete
  69. Works a treat. Tossed in my Telstra chip, ran the program and I no longer had a locked to 3 pocket modem. Thanks!

    ReplyDelete
  70. Thanks to you, Sandra! Have fun!

    ReplyDelete
  71. Will this work on a E585u-82 model from Vodafone Australia?

    ReplyDelete
  72. I just tried to use the unlocker with my new E585u-82 and it is prompting the 'Unsupported model!' message. Any help would be appreciated.

    ReplyDelete
  73. Sorry.. my bad. that model is unsupported. You'll be refunded right away.

    ReplyDelete
  74. I need the email you registered the program with to do the refund.

    ReplyDelete
  75. No worries. I havent purchased a code yet.

    Just hoping that this would be supported as this unlocker worked flawlessly in my previous E585.

    ReplyDelete
  76. Oh.. I remebered correctly then that my program doesn't allow even to buy the code if the model is not supported. Ok.. no harm no foul.

    ReplyDelete
  77. Unfortunately that model has a totally differeent firmware and I had no time to inspect it (and nobody sent a unit for testing)

    ReplyDelete
  78. Hi - I only read this after donating and finding the model u-82 is unsupported. Do you expect this model will be supported in the near future?

    ReplyDelete
  79. AZ: unfortunately no.. Nobody ever sent such dev ice to me and I haven't even had the time to work on e586 :(

    ReplyDelete
  80. I bought a unlimited unlock previously, Im now trying to unlock the E586 and im just getting the message connect card?
    Any suggestions, Dont understand message about reinstall wifi drivers, what drivers?

    ReplyDelete
  81. The program is ONLY for E585 and NOT for E586.

    ReplyDelete
  82. is there a unlock available for the E586

    ReplyDelete
  83. could someone please post the drivers here - I cannot access my devfice to get them.
    I tried updating the firmware (model e585u-82), after it already WAS unlocked, as thought it would let me attain faster speeds, (I now believe I was wrong), and it sits there with the '3' logo fading in and out (or battery charging), and that's it.
    I cannot get my computer to recognise it to logon to re-unlock it. also am unsure what (original) firmware to flash it with (first? i'm assuming)... so help with that would be very much appreciated also.
    thankyou!
    good example of 'if it ain't broke, don't fix it!' ;)
    Regards,
    Frustrated Tim.
    thanks

    ReplyDelete
  84. Hi
    same thing happen with me the only thing I have figure it out is when you take the battery out and reinstall it after that keep pressing reset button along with power button the pocket wifi will start in recovery mode and after that the computer will recognize your wifi. Unfortunately I have tried many firmware no one has recovered my wifi.

    ReplyDelete
  85. ibra: that's because you flashed the wrong device firmware and bricked it.

    ReplyDelete

Post a Comment

Popular posts from this blog

TP-LINK Configuration file encrypt and decrypt.

Here we go! TP-Link is another company that thinks that security by obscurity could ever work. If you "backup" the configuration from most TP-Link routers, you will get a .BIN file which is "encrypted". Use this utility below, to decrypt it (so you can edit it) and encrypt it again. Have fun. Drop files here or

Powerline Ethernet fun and secrets.

Many 200 Mb/s powerline adapters nowadays are based on the INTELLON 6300 chipset. Despite what can be thought looking at them, they are all using the same hardware and firmwares. I heard many people with Netgear XAV101 or Linksys PLK 200 or PLE 200 having problems after firmware updates and many other people with other brands having much more problems because of lack of support or configuration/upgrade utilities. So let me explain a few things I learnt studying them. Many of 200 Mb/s powerline ethernet adapters follow the "HomePlug AV" standard. (85 Mb adapters use HomePlug 1.0 standard which is completely different). This standard uses ethernet broadcast packets using the HomePlug AV protocol. The interesting thing is that their firmware is made of two different parts: a .PIB file (Parameter Information Block) and a .NVM file (the code itself). In the P.I.B. there are many interesting things: The branding (mac address, device name, etc) and the tone map. I test

Your own CORS ANYWHERE proxy on CLOUDFLARE

Hello again! Many of you probably hate as I do CORS because it hinders the very nature of internet, which is SHARING. There are some services to circumvent this commercial  restriction, one of these is the famous "cors anywhere". So yesterday I decided to make my own and allow you to make your own in only 2 minutes. To do so you just need a cloudflare account (can be set up in 1 minute). The you can upload my worker on it and have your personal very fast cors proxy! So, enough talk, just head to:  https://github.com/Zibri/cloudflare-cors-anywhere The is also a demo online at: https://test.cors.workers.dev Enjoy! Zibri