Skip to main content

Huawei E585 Unlock download!


Here is the unlocker for you to download!

Highlights:
1) very fast (2-3 seconds)
2) Compatible with Xp, Vista and Win7
3) easy to use.

Instructions:

Download the program.
Run the program.

Donate via paypal and PASTE the confirmation number of your donation.
The transaction id should work after a minute from your donation.
Donate using the window opened by the program.

The code will work only on the PC you run the program.
This program works only with Huawei E585.

Send me an email if you need an unlimited version.
(Unlimited number of unlocks)

Note:
If the program says "Connect card." that means that E585 drivers
are not installed correctly.
Remove any "wifi manager" and old drivers,
then reinstall E585 drivers from it's virtual cdrom.

Please be sure that you have run "autorun.exe" which should have
appeared in a pop-up window when you first inserted the Mifi.  This is
required to install all the drivers that are needed for the
modification.  If you have not done this
you may see a message "Connect card."

You also have to switch it ON pressing
 the button on the right side of the E585.

Comments

  1. Zibri..

    I have purchased a unlock code and followed the instructions precisely, with and without sim inserted but i still get "invalid sim"...

    Any Ideas?

    thanks in advance

    ReplyDelete
  2. @fridgefreezerdirect:

    I analyzed your "strange" card. I sent you an email with your unlock code.

    ReplyDelete
  3. Absolutely brilliant couldn't recommend more! Brilliant work thanks alot!

    ReplyDelete
  4. @Tom: thanks to you for taking the time to leave a comment! :)

    ReplyDelete
  5. Hello Zibri - can your program unlock the E585u-82? It's PocketWiFi version 2 - here http://dicksmith.com.au/product/E6780/vodafone-pocket-wifi2-pre-paid-broadband

    ReplyDelete
  6. @David: I've never seen one. If someone can supply a brand new and untouched unit I can try. Drop me an e-mail if you want to supply one.

    ReplyDelete
  7. can your program unlock the new huawei E585u modem?

    ReplyDelete
  8. Not at the moment. I think I will need a sample card to do that.

    ReplyDelete
  9. Hi,

    Donated and unlocked today - read the instructions and all went perfectly. I set up a profile for Orange with "orangeinternet" as apn static, and all other settings default. It recogises the sim fine but I just keep getting "connecting" ... then "disconnected". Just to test furhter, I set up a profile for Vodafone with apn "internet" and id/pw both "web". Same problem.

    Could really use some help here.

    Regards

    ReplyDelete
  10. Hi Neil, that can happen for many reasons:

    1) wrong APN or wrong APN username/password

    2) you created a new profile but you forgot to set it as default.

    3) your SIM card has no access for some reason.

    Regards,
    Zibri

    ReplyDelete
  11. Hi Zibri,

    Many thanks - it was No. 2 :)

    Do you know where I could find the profile settings for GiffGaff in the UK (based on O2 but hte O2 profile alone doesn't work).

    Regards

    ReplyDelete
  12. Will it work on the new Three UK modem E586?

    ReplyDelete
  13. No.. this is an E585 unlocker. If there will be an E586 unlocker, that will be a separate program.

    ReplyDelete
  14. i have a vodafone australian new E585U-82 model. will the above method work or is there still no cheap pocket wifi 2 unlock method avaialble?

    ReplyDelete
  15. download the program and run it. It has instructions inside the zip file.

    ReplyDelete
  16. I plan to change my simcard to another provider (say A)and in 3 month I will go overseas and will use another provider in that country (say B) and will go back home and use provider A again.

    Which unlock type I will need, "BUY" or "BUY UNLIMITED"?

    Thanks

    ReplyDelete
  17. You need the normal BUY. Unlimited version is for people needing to unlock more than 9 different devices.

    ReplyDelete
  18. Fantastic, many thanks. What a great service!
    Keep up the good work!

    travel wireless router

    ReplyDelete
  19. Hey Zibri... Sorry to bump up this old post, I Need to unlock E585U-82 model (aka Pocket wifi 2 by Vodafone)

    Does your application support it ??

    ReplyDelete
  20. Hello I have the E586 on three UK and I want to:
    1: unlock it
    2: upgrade to the latest firmware
    3: allow more than 5 connections (I want 6)
    4: Lock it to hsdpa only

    Is this possible ?

    ReplyDelete
  21. I want:

    1: peace in the world.
    2: lots of money.
    3: to live forever.

    ReplyDelete
  22. I was of course willing to pay and there was an unspoken please and thank you in there :)

    Also you did not answer question 4 ?

    :)

    ReplyDelete
  23. :D

    There's justs a problem here: this ustility works only on E585!

    I didn't work at all on E586 yet!

    ReplyDelete
  24. oh ok thanks mate I will check back in the future in case the situation changes. :)

    ReplyDelete
  25. Wow..!!
    Wonderful ideas you have gathered .nokia mobiles

    ReplyDelete

Post a Comment

Popular posts from this blog

TP-LINK Configuration file encrypt and decrypt.

Here we go! TP-Link is another company that thinks that security by obscurity could ever work. If you "backup" the configuration from most TP-Link routers, you will get a .BIN file which is "encrypted". Use this utility below, to decrypt it (so you can edit it) and encrypt it again. Have fun. Drop files here or

Powerline Ethernet fun and secrets.

Many 200 Mb/s powerline adapters nowadays are based on the INTELLON 6300 chipset. Despite what can be thought looking at them, they are all using the same hardware and firmwares. I heard many people with Netgear XAV101 or Linksys PLK 200 or PLE 200 having problems after firmware updates and many other people with other brands having much more problems because of lack of support or configuration/upgrade utilities. So let me explain a few things I learnt studying them. Many of 200 Mb/s powerline ethernet adapters follow the "HomePlug AV" standard. (85 Mb adapters use HomePlug 1.0 standard which is completely different). This standard uses ethernet broadcast packets using the HomePlug AV protocol. The interesting thing is that their firmware is made of two different parts: a .PIB file (Parameter Information Block) and a .NVM file (the code itself). In the P.I.B. there are many interesting things: The branding (mac address, device name, etc) and the tone map. I test

Your own CORS ANYWHERE proxy on CLOUDFLARE

Hello again! Many of you probably hate as I do CORS because it hinders the very nature of internet, which is SHARING. There are some services to circumvent this commercial  restriction, one of these is the famous "cors anywhere". So yesterday I decided to make my own and allow you to make your own in only 2 minutes. To do so you just need a cloudflare account (can be set up in 1 minute). The you can upload my worker on it and have your personal very fast cors proxy! So, enough talk, just head to:  https://github.com/Zibri/cloudflare-cors-anywhere The is also a demo online at: https://test.cors.workers.dev Enjoy! Zibri